DMP Electronics XR500 Manual de usuario descargar pdf (Pagina 59)

Digital Monitoring Products XR500 Series Canadian Programming Guide

zone informaTion

19.7

ARM/DIS AREAS

Arming Zone Area Assignment

InanAreaorHome/Sleep/AwaywithGuestsystem,ifthezonehasbeen

programmedasanArmingType(AR),entertheareasthatthezonecontrols.

Whenthezonechangesfromnormaltoshorted,theprogrammedareastogglebetween

thearmedordisarmedconditionusingtheStyleprogrammingbelow.Whenrestoredto

normal,noactionoccurs.Whenthezoneisopenedfromanormal(disarmed)state,a

troubleisreported.Whenopenedfromashorted(armed)state,analarmisreported

andthezoneisdisableduntilyoudisarmthearea(s)fromeitherakeypadorRemote

Link™computer.

Tovisuallyindicatethearmedstateofthearea(s),youcanassignanArmedOutput

toindividualareasanduseremoteLEDsatthekeyswitch.TheLEDturnsonoroffto

indicatetotheuserthearmedstateofthearea(s).

ARM AREAS: PERIM

InanAll/PerimeterorHome/Sleep/Awaysystem,thisoptionspeciestheareasto

bearmedbytheArmingTypezone.ForAll/Perimetersystems,choosePERIMorALL,

forHome/Sleep/AwayorHome/Awaysystems,chooseHOME,SLEEP,orAWAY.

PERIM ALL

Perimeter/All-SpecifywhetherthearmingzonearmsjustthePerimeter(PERIM)or

thePerimeterandInteriorareas(ALL)forAll/Perimetersystems.Whendisarming,

all areas are disarmed.

HOME SLEEP AWAY

Home/Sleep/Away-SpecifywhetherthearmingzonearmsthePerimeter(HOME),

thePerimeterandInterior(SLEEP),orallthreeareas(AWAY).Whendisarming,all

areas are disarmed.

Arming Zone Operation

IfanybadzonesarepresentwhentheArmingzoneisshorted,theLEDdelays

lightingfor5seconds.Ifduringthe5-seconddelaytheArmingzoneisshorted

again no arming takes place. If 5 seconds expire without the zone shorting again

or restoring to normal, the areas arm and bad zones are force armed. To allow bad

zones to be force armed, the Any Bypass option must be set to YES. If Any Bypass

optionissettoNO,armingdoesnotoccur.SeetheAreaInformation-AnyBypass

section. A priority zone cannot be force armed.

19.8

STYLE:

Style

Thisoptionspeciesthestyleforthearming/disarmingoperation.Thedefaultstyle

isTGL(toggle).PressanySelectkeytodisplaytheSTYLEoptions.Toviewmore

styleoptionspresstheCOMMANDkey.

TGL ARM DIS STEP

TGL (Toggle) - Whenthezonechangesfromnormaltoshorted,theprogrammed

areastogglebetweenthearmedordisarmedcondition.Whenrestoredtonormal,

noactionoccurs.Whenthezoneopensfromanormal(disarmed)state,atroubleis

reported.Whenopenedfromashorted(armed)state,analarmisreportedandthe

zoneisdisableduntilyoudisarmthearea(s)fromeitherakeypadorRemoteLink.

ARM - Whenthezoneisshorted,theprogrammedareasarearmed.Whenrestoredto

normal,noactionoccurs.Whenthezoneisopenedfromanormal(disarmed)state,a

troubleisreported.Whenopenedfromashorted(armed)state,analarmisreported.

DIS (Disarm) - Whenprogrammed,ashortdisarmstheprogrammedareas.When

restoredtonormal,noactionoccurs.Whenthezoneisopenedfromanormal

(disarmed)state,atroubleisreported.

STEP - A short arms the areas and beeps the keypads once. A normal condition

causes no action. An open condition disarms the programmed areas and beep the

keypads for one second.

Note:Thisarmingstyleisdesignedforwirelessarmingpendants.Whenusingan

arming/disarmingkeyswitchlocatethekeyswitchwithintheprotectedarea.

MNT

MNT (Maintain) - Whenthezoneisshorted,theprogrammedareasarearmed.

Whenrestoredtonormal,theprogrammedareasaredisarmedandanyalarmbells

aresilenced.Whenthezoneisopenedfromanormal(disarmed)state,atrouble

isreported.Ifopenedfromashorted(armed)state,analarmisreportedandthe

zoneisdisableduntilyoudisarmthearea(s)fromeitherakeypadorRemoteLink.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 83 84

Comentarios a estos manuales

Sin comentarios

DMP Electronics XR500 Manual de usuario Pagina 59

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad DMP Electronics XR500