LOOP MONITOR
User Code Level: 4
Function: Monitor selected disarmed loops and display their name
when tripped.
Loop Monitor will monitor any disarmed loop and will display the loop
name and sound the keypad monitor tone when the loop trips. The
loop will be displayed at all SECURITY COMMANDs in the system.
Any combination of disarmed loops may be placed in Loop Monitor.
If more than one loop is in Loop Monitor the last loop that tripped will
be displayed. When the loop is armed the name is cleared.
Loop Monitor display will alternate with Armed Display and Status
List. Armed Display and Status List are optional. The options are
selected at the time the system is programmed.
Step By Step:
1. Press the key until LOOP MONITOR? is
displayed.
2. When LOOP MONITOR? is displayed press any one of
the top four
select keys. The display will read ENTER CODE: - .
3. Enter your code number and press . The dis-
play will read:
PERIM ALL NBR .
COMMAND
COMMAND
PERIM
4. Press to place all disarmed perimeter loops into loop
monitor.
(PERIM is displayed on all/perimeter systems
only.)
ALL
Press to place all disarmed loops into loop monitor.
NBR
Press to enter a specific loop number for loop moni-
tor.
5. If ALL or PERIM is selected the display will ask if the loops are
to be added or removed from loop monitor.
6. If NBR is selected the display will read LOOP : - ADD RMV
.
ADD
6a. Enter the desired loop number and press
to add to, or
RMV
7. The loop number will automatically disappear and a new loop
number may be entered in step 6. A loop is automati-
cally removed from Loop Monitor when it
is armed. The loop can be returned to the Monitor mode
automatically, when
disarmed, or it may be required to manually reenter the loop
number each
arming cycle. This option is selected at the time the system is
to remove from Loop
Monitor.
28
20
Permanent or Temporary Step By Step:
5. If PRM or TMP is pressed in step 4 the display will read
AREA NO:- .
*
5a. Enter the area number you wish to schedule and press .
The display will read SUN MON TUE WED
then THU FRI SAT .
5b. Press the key below the desired day when
it is displayed.
The SECURITY COMMAND will show you the current sched-
uled
opening and closing times for that day OP TIME ??:?? ?M
then
CL TIME ??:?? ?M then DELETE KEEP
.
KEEP
5c. Press to keep the current schedule and return
to step 5a
DELETE
Press to delete the current schedule. The dis-
play will
read OPENING TIME? then - : AM
PM .
* An area number is requested only if your system is
programmed to utilize
a separate permanent or temporary schedule for each
area.
AM
5d. Enter the new opening time and press the
or
PM
key.
(Note: a zero must be entered for the tens digit of the hour
COMMAND
Opening
Closing
: _M : _M : _M : _M : _M : _M : _M
: _M : _M : _M : _M : _M : _M : _M
Opening
Closing
: _M : _M : _M : _M : _M : _M : _M
: _M : _M : _M : _M : _M : _M : _M
SUN MON TUE WED THU FRI
SAT
Opening
Closing
: _M : _M : _M : _M : _M : _M : _M
: _M : _M : _M : _M : _M : _M : _M
Opening
Closing
: _M : _M : _M : _M : _M : _M : _M
: _M : _M : _M : _M : _M : _M : _M
Area 4 Area 3 Area 2 Area 1
PERMANENT SCHEDULE
(55 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales