DMP Electronics XR500 SERIES Especificaciones descargar pdf (Pagina 37)

Information: General information detail about program operations.

Warning: An error condition such as minor communication problems, timeouts, etc. that can be

handled without operator intervention. A warning message may or may not be displayed to the

operator.

Exception: An error that requires operator action to recover or restore normal operation such as an

invalid COM Port selection for the receiver.

Critical: An error that caused Remote Link to stop responding such as an Access Violation or database

corruption.

Archive

Pass Through Options

Adm in Reader

Enable Auto Account Archive: Select this option to allow panel

account programming to be automatically archived (saved

separately) when connecting to a panel with programming different

than the programming currently on file. Default is unchecked.

To archive panel account programming manually, select File>Panel

Information.

Max Per Account: Select the maximum number of panel programming archive verisons allowed to be

stored per account. Allowed range is 1 to 20 archives. Default is 5.

System > Configure > Remote Link > Other Tab

Pass Through Options

Mode: When Remote Link is in the Pass Through mode, standard panel reports will be sent to and

acknowledged from a host computer. Select the appropriate setting.

None: Select this option if you are not using Pass Through mode to relay signals to automation

software.

Pass Through: Select this option to pass reports through the Remote Link computer to a host

automation computer.

Outgoing COM Port: Select the COM port that Remote Link will use to communicate with your host

automation computer.

Baud Rate: Set the baud rate to 9600 unless your automation software requires a different setting.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 335 336

Sin comentarios

DMP Electronics XR500 SERIES Especificaciones Pagina 37