Dmp-electronics DMP Command Processor Panel XR500 Manual de usuario descargar pdf (Pagina 13)

Digital Monitoring Products XR500 Series Canadian Programming Guide

INTRODUCTION

1.11 Entering Non-Alpha Characters

Toenteraspaceinanalphaentry,pressthe9digitkeyfollowedbythethirdSelectkey/area.Thethree

charactersonthe9digitkeyareY,Z,andspace.Youcanalsoenterthefollowingcharacters:–(dash),

.(period),*(asterisk),and#(poundsign)usingthe0(zero)keyandthefourSelectkeys/areasfromleft

toright.Forexample,toentera–(dash),pressthe0(zero)keyandthentheleftSelectkey/area.A

dash now appears in the keypad display. The table below shows the character locations for DMP keypads.

Key Number Select Key 1 Select Key 2 Select Key 3 Select Key 4

1 A B C (

2 D E F )

3 G H I !

4 J K L ?

5 M N O /

6 P

R &

7 S T U @

8 V W X ,

9 Y Z space _

0 - . * #

1.12 Keypad Displays Current Programming

Each programming prompt displayed at the keypad shows the currently selected option in the panel

memory. These options are either shown as a number, a blank, or a NO or YES. To change a number or

blank to a new number, press any top row Select key or touch any Select Area. The current option is

replacedwithadash.Pressthenumber(s)onthekeypadyouwanttoenterasthenewnumberforthat

prompt.Itisnotnecessarytoenternumberswithleadingzeros.Thepanelautomaticallyrightjusties

the number when you press the COMMAND key.

To change a programming prompt that requires a NO or YES response, press the Select key or touch the

Select Area for the response not selected. See Figure 5

For example, if the current prompt is selected as YES and you want to change it to NO, on Security

Command, Thinline, or Aqualite keypads press the third top row Select key. The display changes to NO.

Press the COMMAND key to display the next prompt.

Figure 5: Changing the Current Programming Option

1.13 Multiple Displays

For many programming and user options, such as Area selections, Menu Displays, and Status Lists, there

are several displays containing programming. For example, when programming Menu Displays, keypads 1

through16displayontwoseparatedisplays.First,keypads1through8display.PresstheCOMMANDkey

todisplaykeypads9through16.Thissameschemeisusedforareas1through32.

Note:Areasnotpre-programmedatinstallationtodisplayatthiskeypadcannotbeviewed.

THEN

Press the black colored top

row Select key/area.

The keypad displays the new

selection. Press CMD to advance.

YESBELL TST

NOBELL TST

YESBELL TST

NOBELL TST

Thinline

Aqualite

Wireless

Keypads

Clear

Touch

Keypads

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 84 85

Comentarios a estos manuales

Sin comentarios

Dmp-electronics DMP Command Processor Panel XR500 Manual de usuario Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para La Seguridad Dmp-electronics DMP Command Processor Panel XR500