Dmp-electronics DMP Command Processor Panel XR500 Manual de usuario descargar pdf (Pagina 40)

XR500 Series Canadian Programming Guide Digital Monitoring Products

SYSTEM OPTIONS

9.22

ENHANCED ZONE

TEST: NO YES

Enhanced Zone Test

Select YES to allow enhanced zone test operation. The default is NO.

Enhanced operation allows:

• PanicTestandWalkTestfunctionscanberestrictedtooperateonlyduringan

Area 32, Shift 4 schedule if programmed. If no schedule is entered, the walk

test always operates.

• AVerifymessageissenteachtimeazoneistested.Ifazoneistripped

multiple times, a Verify message is sent for each trip. This allows the Central

Station to record the number of devices per zone.

• TheVerifymessageforeachzonetestissentatthetimethetripoccurs

instead of at the end of Walk Test.

• TheSystemTestBeginandSystemTestEndCentralStationmessagesindicate

the type of zone being tested. The System Test Begin message also includes

the user name and number.

9.23 Dual EOL

SelectYEStoenabletheuseofdual1KEOLresistorsonpanelzonesonetoeight.

ThiszoneoperationisusedformediumorhighriskULCListedapplications.Select

NO to disable this feature. Default is YES.

Note:Ifusinga714,714-8,or714-16fordualzoneprotection,programtwozones

as the same name or equivalent and connect to the contact in the protected area.

Refer to the Dual Zone Protection diagram in the XR500 Series Canadian Installation

Guideforcompletedetails.

9.24

SEND 16 CHAR

NAMES: NO YES

Send 16 Character Names

Thisoptionallowscentralstationstoselectbeingsenteithertherst16characters

ofthenameeldortheentireprogrammedname,upto32characters,foruser

name,userprole,zonename,areaname,outputname,andgroupname.

SelectYEStohavetherst16charactersofthenameeldsenttothecentral

station.SelectNOtosendtheexactnumberofcharactersenteredinthenameeld

from 1 up to the maximum of 32 characters. Default is YES.

Note: Using 32 character names increases the length of the DMP Serial 3 message

fromthepaneltothereceiver.TheSCS-1Rreceiverdoesnotrequireanupdateto

pass these messages to the Host Automation System of the Central Station. Before

usingnameslongerthan16characters,determinewhethertheHostAutomation

SystemofyourCentralStationcanaccept17to32characternames.Ifnot,onlyuse

16characternames.

9.25

KEYPAD ARMED LED

ALL

Keypad Armed LED

This option displays only when using an Area system. Press any top row key to select

theoperationoftheArmedLEDonthekeypad.SelectALLtorequireallkeypad

displayareastobearmedbeforethekeypadArmedLEDturnson.SelectANYtoturn

onthekeypadArmedLEDwhenanykeypaddisplayareaisarmed.DefaultisALL.

9.26

USE FALSE ALARM

QUESTION NO YES

Use False Alarm Question

SelectYEStodisplayISTHISAFALSEALARM?NOYESatthekeypadinplaceof

CANCELVERIFYwhenaburglaralarmoccurs.ThisoperatesforALL/PERIMand

HOME/SLEEP/AWAYarmingsystems.DefaultisNO.

9.26

ALLOW OWN USER

CODE CHG? NO YES

Allow Own User Code Change

This option allows users without user code authority to change their own user code.

WhenYESisselected,theUserCodemenudisplaysUSERCODE:*****atthekeypadto

allow that user to change their own code. If NO is selected, the user cannot change their

personal user code. Default is NO.

KEYPAD ARMED LED

ALL ANY

DUAL EOL NO YES

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 84 85

Comentarios a estos manuales

Sin comentarios

Dmp-electronics DMP Command Processor Panel XR500 Manual de usuario Pagina 40

Comentarios a estos manuales

Relacionado con productos y manuales para La Seguridad Dmp-electronics DMP Command Processor Panel XR500