Dmp-electronics DMP Command Processor Panel XR500 Manual de usuario descargar pdf (Pagina 59)

Digital Monitoring Products XR500 Series Canadian Programming Guide

ZONE INFORMATION

19.4

ZONE TYPE: BLANK

Zone Type

TheZoneTypedenesthepanelresponsetothezonebeingopenedorshorted.

This is called the Alarm Action. There are up to 13 possible alarm action responses

depending on the zone type and any restrictions it may have. See the Zone Type

chart in the Appendix.

When you assign a Zone Type to a zone, automatic zone responses are made. There

are 12 Zone Types to choose from. Application descriptions for each zone type can

be found in the Appendix of this manual.

To enter a new Zone Type, press any Select key. The display lists all of the available

Zone Types four at a time.

- - NT DY EX

Blank, Night, Day, or Exit. Press COMMAND for additional zone types.

FI PN EM SV

Fire, Panic, Emergency, or Supervisory. Press COMMAND for additional zone types.

A1 A2 FV AR

Auxiliary1,Auxiliary2,FireVerify,orArming(keyswitch).PressCOMMANDfor

additional zone types.

If you select Blank, Night, Day, Exit, Auxiliary 1, Auxiliary 2, or Arming as the Zone

Type, the zone must be assigned to an active area. If you select Fire, Fire Verify,

Panic,Emergency,orSupervisoryastheZoneType,itisa24-hourzonethatisalways

armed and no area assignment is needed.

Zone Type Specications

Thepanelcontains12defaultzonetypesforuseinconguringthesystem.Thesezone

types provide the most commonly selected functions for their applications. All zone

types except the Arming zone type can be customized by changing the options listed

below. Arming zone type programming continues at Arming Zone Area Assignment.

Refer to the Appendix for complete zone type descriptions.

19.5

AREA NO: -

Area Assignment

Enter the area number where the Night, Day, Exit, Auxiliary 1, or Auxiliary 2 zone

isbeingassigned.ForanAreasystem,areanumbers1-32canbeassigned.Fora

Home/Sleep/AwaywithGuestsystem,areanumbers1-9canbeassigned.

AREA: PERIMETER

InanAll/PerimeterorHome/Sleep/Awaysystem,thecurrentlyselectedarea,

Perimeter, Interior, Bedroom displays.

INT PERIM

OnanAll/Perimetersystem,selectINTtoprogramzonesfortheinteriorareaand

select PERIM to program zones for the perimeter area.

INT BDRM PERIM

OnaHome/Sleep/Awaysystem,selectINTtoprogramzonesfortheinteriorarea,

select BDRM to program zones for the bedroom area, and select PERIM to program

zones for the perimeter area.

19.6

FIRE BELL OUT: 0

Fire Bell Output

Thisoutput(1to6,500to999,G1toG20,orD1toD16)isturnedonanytimea

Fire, Fire Verify, or Supervisory zone is placed in alarm. The output is turned off by

any the following actions:

• WhentheUserMenuAlarmSilencefunctionisperformed.

• Whenavalidusercodeisenteredtosilencethebell.

• WhentheSilencekeyispressedonthe630FRemoteFireCommandCenter.

• UsingtheOutputsOn/OfffunctionintheUserMenu.

• TheexpirationoftheBellCutofftime.

Thisoutputcanbeconnectedtoalamp,LED,orbuzzerusingtheDMPModel716

Output Expansion Module.

19.7

ARM/DIS AREAS

Arming Zone Area Assignment

InanAreaorHome/Sleep/AwaywithGuestsystem,ifthezonehasbeen

programmedasanArmingType(AR),entertheareasthatthezonecontrols.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 84 85

Comentarios a estos manuales

Sin comentarios

Dmp-electronics DMP Command Processor Panel XR500 Manual de usuario Pagina 59

Comentarios a estos manuales

Relacionado con productos y manuales para La Seguridad Dmp-electronics DMP Command Processor Panel XR500