Dmp-electronics DMP Command Processor Panel XR500 Manual de usuario descargar pdf (Pagina 33)

Digital Monitoring Products XR500 Series Canadian Programming Guide

REMOTE OPTIONS

7.11.2 Encrypt Cellular Remote

YES encrypts data sent over a cellular connection. Default is NO.

7.12 Allow RS-232 Remote

YESallowsremoteprogrammingovertheon-boardRS-232port.DefaultisYES.

7.13 Entré Connection

This option displays only if the panel has network capability. Select NET to allow

adedicatednetworkconnectionwithEntré.OptionsareNONEorNET.Defaultis

NONE.

7.13.1 Entré Incoming TCP Port

ThisoptiondisplaysonlyifNETischosenfortheEntréconnection.Enterthe

programmingportnumberfortheincomingEntréconnection.Theprogrammingport

identiestheportusedtocommunicatemessagestoandfromtheEntrésoftware.

This port cannot be the same port as programmed in Network Programming Port.

The default Programming Port setting is 2011.

7.13.2 Entré IP Address

ThisoptiondisplaysonlyifNETischosenfortheEntréconnection.EntertheEntré

  IPaddresswherethepanelsendsnetworkmessages.TheEntréIPAddressmustbe

unique and cannot be duplicated on the network. Enter all 12 digits and leave out

  theperiods.Forexample,enterIPaddress192.168.0.250as192168000250.The

periods display automatically. Default is 0.0.0.0

7.13.3 Entré Outbound TCP Port

ThisoptiondisplaysonlyifNETischosenfortheEntréconnection.Enterthe

programmingportnumberfortheoutboundEntréconnection.Theprogrammingport

identiestheportusedtocommunicatemessagestotheEntrésoftware.Defaultis

2001.

7.13.4 Entré Backup IP Address

ThisoptiondisplaysonlyifNETischosenfortheEntréconnection.EntertheIP

  backupaddresswherethepanelsendsnetworkmessagesiftherstEntréIPAddress

  fails.TheEntréIPAddressmustbeuniqueandcannotbeduplicatedonthenetwork.

Enter all 12 digits and leave out the periods. For example, enter IP address

 192.168.0.250as192168000250.Theperiodsdisplayautomatically.Defaultis

0.0.0.0

7.13.5 Entré Backup TCP Port

ThisoptiondisplaysonlyifNETischosenfortheEntréconnection.Enterthe

backupprogrammingportnumberfortheoutboundEntréconnectionincasethe

connection to the primary IP fails. Default is 2001.

7.13.6 Entré Checkin

Selecttherateatwhichcheck-inmessagesaresentovertheEntréconnection.

Select0(zero)todisablecheckinmessages.Rangeis0,3-240minutes.

Default is 0.

7.13.7 Entré Passphrase

Toenableencryptionenteran8to16-characterPassphraseusingalphanumeric

characters.IfyouleavethePassphraseblank,thepanelcommunicateswithEntré,

but the data is not encrypted. The Passphrase is blank by default.

7.14 Send Local Changes

ThisoptionallowsthepaneltoautomaticallyupdateRemoteLinkatthecentral

station with any changes made to the panel.

Select NET or DD to send local programming changes or User Menu changes to user

codes,userproles,schedules,orholidaydatestoRemoteLinkafterexitingthe

programming or User Menu. If NET is selected, changes are sent using Network. If

DD is selected, changes are sent using Dialer. Default is NO to disable this feature.

ENCRYPT CELL

REMOTE? NO YES

ALLOW 232

REMOTE? NO YES

ENTRE

CONNECTION: NONE

ENTRE INCOMING

TCP PORT: 2011

000.000.000.000

ENTRE IP

CHANGES? NO

NO NET DD

SEND LOCAL

000.000.000.000

ENTRE BACKUP IP:

ENTRE BACKUP TCP

PORT: 2001

ENTRE CHECKIN

MINUTES: 0

ENTRE PASSPHRASE

ENTRE OUTBOUND

TCP PORT: 2001

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 84 85

Comentarios a estos manuales

Sin comentarios

Dmp-electronics DMP Command Processor Panel XR500 Manual de usuario Pagina 33

Comentarios a estos manuales

Relacionado con productos y manuales para La Seguridad Dmp-electronics DMP Command Processor Panel XR500