Dmp-electronics DMP Command Processor Panel XR500 Manual de usuario descargar pdf (Pagina 65)

Digital Monitoring Products XR500 Series Canadian Programming Guide

ZONE INFORMATION

ARM AREAS: PERIM

 InanAll/PerimeterorHome/Sleep/Awaysystem,thisspeciestheareatobe

armedbytheKeyFobbuttonbeingprogrammed.ForAll/Perimetersystems,

choosePERIMorALL,forHome/Sleep/AwayorHome/Awaysystems,choose

HOME,SLEEP,orAWAY.

Note:Areas3andhigherinanAll/Perimetersystem,andareas4andhigherina

Home/Sleep/Awaysystemarenotavailableforuse.

Afterselectingtheareas,forone-buttonkeyfobstheZoneNo.:prompt

displays.Fortwo-buttonorfour-buttonkeyfobs,theKeyFobButtonSelection

option displays to program additional buttons.

19.11.10

OUTPUT NO: XXX

Output Number

YoucanspecifyarelayoutputtooperatewhenOUT(Output),PN(Panic),PN2

(Panic2),EM(Emergency),orEM2(Emergency2)isselectedforakeyfob

ButtonActionandthebuttonispressed.Validrangeis1to6,500to999,

D1toD16,orG1toG20.ForanoutputturnedonbyaPN,PN2,EM,orEM2

button action, the output turns off when any area is disarmed.

To enter an output number, press a top row Select key followed by the output

number. Press the COMMAND key.

19.11.11

OUTPUT ACTION:

yyy: XXXXXXXX

Output Action

Thisoptionallowsyoutodenetheoutputaction(STD,PLS,MOM,TGL,OFF)

for the selected output number. The default is Steady.

yyy=thenameofthebuttonbeingprogrammed(TOP,BTM,LFT,RGT).

xxxxxxxx=thecurrentlydenedoutputaction.

OUTPUT ACTION?

STD PLS MOM TGL

STD (Steady) - The output is turned on and remains on.

PLS (Pulse) - The output alternates one second on and one second off.

ThepulsingrateforaModel716relayattachedtotheLX-Busis1.6seconds.

Note:PulseisnotavailableforkeyfobbuttonoutputprogrammedD1toD16or

G1toG20.

MOM (Momentary) - The output is turned on only once for one second.

TGL (Toggle) - The output alternates between the on state and off state. Each

button press toggles the output state.

Note:ToggleisnotavailableforkeyfobbuttonoutputprogrammedG1toG20.

OUTPUT ACTION?

OFF

OFF (Off) - The output is turned off. If programmed, the output was turned

on by some other means such as another button press, a zone action, or a

schedule.

Note:WhentheoutputisassignedtoPN/PN2orEM/EM2buttonactionandis

turned on, the output turns off when any area is disarmed.

When the output action is steady, pulse or toggle and the output is turned on,

the output remains on until:

— the output cutoff time expires

— the output is reset from the keypad menu

— toggled off

19.11.12

NEXT ZONE NO YES

Next Zone

SelectYEStoreturntotheZONENO:-prompttoprogramanewzone.Select

NO to display the Alarm Action option.

Note: All wireless programming is stored in the XR500 Series Canadian panel. The 1100X Wireless

Receiver obtains the necessary programming information from the panel each time the receiver powers up,

when the programmer STOP routine is selected or the panel is reset. The receiver memory refresh takes

upto10secondstocompletedependingonthenumberofwirelesszonesprogrammedandtheRedLED

remains on during this time. Normal receiver operation is inhibited during the memory refresh period.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 84 85

Comentarios a estos manuales

Sin comentarios

Dmp-electronics DMP Command Processor Panel XR500 Manual de usuario Pagina 65

Comentarios a estos manuales

Relacionado con productos y manuales para La Seguridad Dmp-electronics DMP Command Processor Panel XR500